Aluminum veneerIt is a common building material, and its overlapping method is one of the important factors affecting its appearance and usability. The following will provide a detailed introduction to the overlapping method and characteristics of aluminum veneer.

1. Welding overlap

Welding overlap is a commonly used overlapping method for aluminum veneers, which is mainly connected together by electric welding or gas welding. The advantage of this method is that it is firmly connected and suitable for large-area aluminum veneer splicing; The disadvantage is that professional equipment and technology are required, and welding marks are prone to occur, which affects the aesthetics.

1. Corner code overlap

Corner code overlap is another commonly used overlap method for aluminum veneers, which mainly connects the aluminum veneers together through corner codes and screws. The advantage of this method is that it is easy and fast to connect, and is suitable for small area aluminum veneer splicing; The disadvantage is that the connection strength is low, and it is prone to looseness and detachment.

1. Bonding and overlapping

Adhesive bonding is a new type of bonding method developed in recent years for aluminum veneers, which mainly uses glue to bond the aluminum veneers together. The advantage of this method is that it has high connection strength, no gaps, and is suitable for splicing aluminum veneers of various shapes; The disadvantage is that it requires professional glue and craftsmanship, and is easily affected by environmental factors such as temperature, humidity, etc.

1. Rivet overlap

Rivet overlap is a relatively rare way of overlapping aluminum veneers, mainly using rivets to connect the aluminum veneers together. The advantages of this method are high connection strength and good stability, suitable for large building curtain walls and other occasions; The disadvantage is that it requires professional rivets and processes, and the cost is relatively high.

There are various ways to overlap aluminum veneer, such as welding overlap, corner code overlap, bonding overlap, and rivet overlap. Different overlapping methods are suitable for different occasions and needs. Enterprises should choose the appropriate overlapping method according to the actual situation to ensure the quality and aesthetics of the product.